Influence of yttrium on changes in the structure of amorphous metal alloys of the Al 87 (Y,Gd) 5 (Ni,Fe) 8 system due to short-term annealing

Read full text Summarise with VIRAT
Authors: Kh. Khrushchyk, Paweł Świec, Yuriy Kulyk, Małgorzata Karolus, L. Boichyshyn
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In this work, the influence of rare earths and transition metals on the kinetics of stable crystallisation for the amorphous metal alloys (AMAs) with the following compositions: Al 87 Gd 5 Ni 4 Fe 4 and Al 87 Y 4 Gd 1 Ni 4 Fe 4 are shown.Isothermal annealing were performed at certain temperatures with heating rate 20 K/min determined from the DSC curves, which are characteristic of stable growth of crystals of the secondary crystallization stage and equal to 645 and 647 K, respectively.X-ray diffraction analysis showed that after 5 minutes of isothermal annealing, nanocrystalline thermally stable phases of Al(X), GdFe 2 , AlFe 2 Ni were formed, which did not change during the crystallisation process for AMAs systems Al 87 (Y,Gd) 5 (Ni, Fe) 8 .Changes in the structure and size of the nanocrystals during the crystallisation process were investigated by transmission electron microscopy and high resolution electron microscopy (TEM/HREM, Jeol JEM 3010).The analysis confirmed that the addition of yttrium significantly changes the crystallisation temperature and phase composition of the crystallised alloys.The object of the tests were AMAs alloys in the form of ribbons with a thickness and width of 20-25 μm and 3 mm, respectively, which were obtained at the G. V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (Kyiv) by melt spinning method in a helium atmosphere on a copper drum rotating at a speed of ~30 m/s.The melt was prepared from pure metals and binary compounds REAl 3 (RE = Y, Gd).The purity of the starting metals was as follows: Al (99.999 wt.%), Ni (99.99 wt.%), Y (99.96 wt.%), Gd (99.96 wt.%) and Fe (99.99 wt.%).

Fields of Study & Subjects

Metallic Glasses and Amorphous Alloys Quasicrystal Structures and Properties Metallurgical and Alloy Processes

Publication details

Journal / source
Acta Crystallographica Section A Foundations and Advances
Volume
81
Issue
a1
Pages
e378–e378
Publication date
30 March 2026
Language
EN