Single-Channel Six Degree-of-Freedom Magnetic Tracking Using Tuned Sensors in Parallel
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Electromagnetic tracking (EMT) is widely used for image-guided interventions due to its immunity to line-of-sight constraints, but conventional six degree-of-freedom (DOF) tracking requires at least two inductive sensor signals acquired through independent channels. This increases hardware complexity, power consumption, and prevents further miniaturisation of the sensing module, especially in wireless and catheter-based applications. A single-channel solution is therefore desirable. This paper presents a 6-DOF tracking method using two spatially separated inductive sensors connected in parallel and spectrally differentiated using series tuning capacitors. By modelling the frequency response of each tuned sensor, and employing dual-tone magnetic field excitation, 6-DOF spatial information is extracted from a single acquisition channel without multiplexing. A direct 6-DOF objective function is formulated, eliminating the need for intermediate 10-DOF reconstruction. Experimental validation demonstrates accurate 6-DOF pose estimation, achieving mean positional errors of 0.53 mm and 0.72 mm, and mean orientation errors below 1°. The method preserves signal fidelity, avoids switching delays, and significantly reduces acquisition hardware requirements. These results confirm that tuned inductive sensors in parallel enable accurate single-channel 6-DOF EMT, offering a viable route toward further integration and miniaturisation in minimally invasive navigation systems.
Fields of Study & Subjects
Magnetic Field Sensors Techniques
Sensor Technology and Measurement Systems
Wireless Power Transfer Systems
Publication details
- Journal / source
- IEEE International Instrumentation and Measurement Technology Conference
- Pages
- 1–6
- Publication date
- 1 May 2026
- Language
- EN