Study on the Total Harmonic Distortion of Microspeaker by 3D Finite Element Simulation
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The use of computer simulation software to assist in the development of new products and rapid optimization through its models has become a staple of most consumer electronics products. In recent years, research on acoustic simulation models has mainly focused on results in the frequency domain. However, distortion characteristics such as harmonics, which directly affect the human ear, can only be simulated and predicted by time-domain modeling. Therefore, in this paper, the 3D time domain of a cross-system microspeaker including electromagnetic, mechanical, and acoustic domains is simulated by a commercial finite-element simulation software from the basic principle of microspeaker operation. The acoustic characteristics of the microspeaker are then measured in a professional electroacoustic measurement laboratory in accordance with international standards, and finally compared with the simulation results to verify the differences. The results show that the three-dimensional simulation model proposed in this paper not only improves the average difference between the low-frequency band and the measurement by approximately 2.6% compared with the conventional 2D axisymmetric model, but also reduces the average difference between the full-frequency band simulation and the measurement to 2.9%. This represents a significant technological breakthrough in the field of electroacoustic finite element method simulation, which has long been lacking in three-dimensional time-domain simulation capabilities.
Fields of Study & Subjects
Electromagnetic Simulation and Numerical Methods
Acoustic Wave Phenomena Research
Speech and Audio Processing
Publication details
- Journal / source
- International Conference on Consumer Electronics
- Pages
- 1–4
- Publication date
- 3 February 2026
- Language
- EN