Experimental Study on Electromagnetic Crimping Technology for Large-Section Conductors of 110kV and Below Cables

View at publisher Summarise with VIRAT
Authors: Kai Chen, Chen Luo, Zhijian Lu, Lanjun Yang
Cited by: 0
References: 7

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

To evaluate the process adaptability of electromagnetic crimping technology in the intermediate joints of large-section conductors, this paper takes the$300 \text{mm}^{2}$cable connecting tube as the research object, and systematically explores the influence laws of discharge voltage and the working zone length of the magnetic concentrator on the crimping performance of the joints. By comparing the diameter reduction deformation, deformation uniformity and DC resistance of the connecting tube under different parameter combinations, the results show that the increase of discharge voltage can significantly reduce the joint resistance and improve the deformation uniformity. At the working zone length of 45 mm, when the voltage exceeds the threshold of 6 kV, the joint resistance changes from fluctuating beyond the limit to reaching the standard stably; with the continuous increase of voltage, the effect of resistance reduction tends to be saturated, but there is still room for optimization in uniformity. The research further reveals that the change of working zone length reflects the trade-off relationship between “magnetic pressure concentration” and “xeffective contact area” due to the dispersed magnetic field in the 60 mm working zone, a higher voltage is required to obtain stable low resistance; although the 30 mm working zone has significant diameter reduction, the resistance dispersion is large due to the limitation of the excessively short effective deformation zone. Considering the resistance level, stability and energy consumption demand comprehensively, the 45 mm working zone length is the optimal process window under the experimental conditions.

Fields of Study & Subjects

Pulsed Power Technology Applications Advanced Welding Techniques Analysis Metal Forming Simulation Techniques

Publication details

Journal / source
International Conference on Electrical Automation and Artificial Intelligence (ICEAAI)
Pages
480–484
Publication date
16 January 2026
Language
EN