Optimization of Voltage Windows for Aqueous Zn– MnO 2 Batteries to Suppress Mn 2+ Dissolution
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Aqueous zinc-ion batteries are considered as promising candidates for large-scale energy storage technologies due to their high safety, low cost, and environmental friendliness. However, manganese-based cathodes suffer from severe Mn2+dissolution and side reactions during cycling, leading to fast capacity degradation. This paper systematically examines the influence of different upper and lower cutoff voltages on Mn2+dissolution and electrochemical performance. In addition, α-cyclodextrin is introduced as an electrolyte additive to enhance cycling performance of batteries. The results show that increasing the lower cutoff voltage within a reasonable range improves long-term cycling, whereas an overly high lower cutoff voltage (≥1.25 V) or an overly low upper cutoff voltage not only suppress the amount of Mn3+formed but also limit the MnO2/ Mn2+conversion, resulting in incomplete reactions and rapid capacity decay. In the tested system, the lower cutoff voltage should not exceed 1.23V when the upper cutoff voltage is 1.8V; the lower cutoff voltage should not exceed 1.24V when the upper cutoff voltage is 1.9V, and an upper cutoff voltage of 1.80–1.85 V is identified as optimal. With the addition of 0.2 M α-CD, the battery operated at a voltage window of 1.23–1.80 V at 0.1 A g–1exhibits a significantly improved capacity retention (66% capacity retention at cycle 789). The battery operated at a voltage window of 1.20-1.90 V at 0.2A g–1reaches 74.7% capacity retention at cycle 743. These results demonstrate that rational voltage-window engineering combined with α-CD additives can prolong AZIBs cycle life.
Fields of Study & Subjects
Aqueous and Flow Batteries
Advancements in Battery Materials
Supercapacitor Materials and Fabrication
Publication details
- Journal / source
- IEEE International Conference on Power, Electronics and Green Energy (ICPEGE)
- Pages
- 31–36
- Publication date
- 28 January 2026
- Language
- EN