Evaluation of Low-Cost Multi-GNSS PPK Positioning for Smart High-Precision Agriculture

View at publisher Summarise with VIRAT
Authors: Rajkumar Mandal, Somnath Mahato, Surajit M
Cited by: 0
References: 25

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Smart high-precision agriculture requires reliable centimeter-level positioning to support applications such as field mapping, automated guidance, and precision input management. This study evaluates the performance of the PostProcessed Kinematic (PPK) positioning technique using lowcost, dual-frequency multi-GNSS receivers for agricultural applications. Experiments were conducted over two short baseline lengths of approximately 0.5 km and 1.5 km within the National Institute of Technology Jamshedpur campus using different GNSS constellation combinations. Raw GNSS observations were collected simultaneously at Base and Rover stations and processed offline using RTKLib software, while Precise Point Positioning (PPP) solutions were used as reference coordinates. Positioning precision was assessed using Distance Root Mean Square (2DRMS), Circular Error Probable (CEP), Spherical Error Probable (SEP), and Mean Radial Spherical Error (MRSE). The results show that centimeter- and sub-centimeter- level accuracy can be achieved with low-cost receivers in PPK mode. For the GPS+Galileo+QZSS configuration, horizontal 2DRMS values as low as 0.8-1.1 mm and MRSE values of 1.1-1.4 mm were obtained, whereas the GLONASS + BeiDou combination exhibited relatively larger errors, with 2DRMS reaching 3.4 mm and MRSE exceeding 5 mm for longer baselines. These findings demonstrate that PPK using low-cost multi-GNSS receivers is a viable and costeffective solution for smart high-precision agriculture, with constellation selection and baseline length significantly influencing positioning performance

Fields of Study & Subjects

GNSS positioning and interference Geodetic Measurements and Engineering Structures Statistical and numerical algorithms

Publication details

Journal / source
International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech)
Pages
1–5
Publication date
6 February 2026
Language
EN