A 71–86-GHz 1024-QAM Direct-Carrier Phase-Modulating Transmitter With Digital-to-Phase Converter and Constant-Envelope Phasor Combiner
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
This article presents a 71–86-GHz 1024-QAM direct-carrier phase-modulating transmitter (DCPM-TX) that synthesizes high-order QAM symbols using phase modulation only. The proposed approach employs dual 9-bit digital-to-phase converters (DTPCs) and a constant-envelope phasor combiner. Each DTPC uses coarse/fine-segmented digitally controlled switched-capacitor transmission lines (SCTLs) (true-time-delay operation) plus a sign mixer, providing a 360° phase range and sub-1° rms phase error while preserving wide carrier and modulation bandwidth. To avoid linear power amplifier (PA) back-off, the modulated phasors are driven into saturation and combined to realize high output power over 71–86 GHz. Using direct-digital-synthesis control with on-chip SRAM, the transmitter also generates a 77–81-GHz FMCW chirp in 5$\mu $s with 84 kHz (0.0021%) rms frequency modulation (FM) error. The prototype DCPM-TX achieves 32 and 25.6 Gbps using 1024-QAM at 73 and 83 GHz, respectively, with peak Poutover 16 dBm while consuming 340-mW DC power and 0.675-mm2core silicon area on 28-nm bulk CMOS.
Fields of Study & Subjects
Radio Frequency Integrated Circuit Design
Advanced Power Amplifier Design
Advancements in PLL and VCO Technologies
Publication details
- Journal / source
- IEEE Journal of Solid-State Circuits
- Volume
- 61
- Issue
- 5
- Pages
- 1804–1816
- Publication date
- 30 March 2026
- Language
- EN