A 6.5-pJ/Step Reconfigurable Readout IC With Duty-Cycled Resistor and Switched Capacitor for High Linearity RC-to-Digital Converter

View at publisher Summarise with VIRAT
Authors: Siyuan Xu, Yi Wei, Yi He, Peter R. Kinget
Cited by: 0
References: 42

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The time-domain, reconfigurable resistance (R) and capacitance (C)-to-digital converter (RCDC) combines a Wheatstone bridge (WhB), a duty-cycled resistor (DCR), and a switched capacitor to realize a pulsewidth-locked loop (PWLL) and a frequency-locked loop (FLL) for highly linear and energy-efficient R&C sensor readout. A low-frequency, relaxation voltage-controlled oscillator (VCO) performs voltage-to-time conversion so a compact, low-power, counter-based time-to-digital converter (TDC) can be used, which further enhances energy efficiency. The feedback loop maintains high system linearity. All key circuits operate rail-to-rail to support the large R&C sensing range needed for multi-type sensing applications. The 65-nm CMOS prototype consumes 5.7–6.2$\mu $W from a 0.9-V supply. It achieves a very high linearity with R${}^{2} \gt 0.99993$(ten channels measured), along with a wide R&C sensing range of 50–400 k$\Omega $and 35–260 pF. The sensing resolution is 262$\Omega $for Rsenand 21 fF for Csenwith a conversion time of 0.5 ms and improves to 23$\Omega $and 3.3 fF when the conversion time is increased to 32 ms; the corresponding figure of merit (FoM) is 6.5 pJ/step in R-mode and 0.75 pJ/step in C-mode.

Fields of Study & Subjects

Analog and Mixed-Signal Circuit Design Sensor Technology and Measurement Systems Advancements in PLL and VCO Technologies

Publication details

Journal / source
IEEE Journal of Solid-State Circuits
Volume
61
Issue
7
Pages
3283–3295
Publication date
1 April 2026
Language
EN