Current-Controlled Pseudo-Resistor Aimed at the $\mathrm{T} \Omega$ Range

View at publisher Summarise with VIRAT
Authors: Gabriel Maranhão, Deni Germano Alves Neto, Marcio Cherem Schneider
Cited by: 0
References: 15

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This work presents a pseudo-resistor capable of achieving resistances of the order of some units of$\mathrm{T} \Omega$. A topology consisting of NMOS and PMOS networks, operational amplifiers, and a reference transistor was developed to enhance the pseudo-resistor linearity. The circuit performance was validated through simulations and measurements, providing a comprehensive evaluation of the device behavior under different bias and process conditions. DC simulations using the layout-extracted view demonstrated that the structure achieved resistances of approximately$1.75 ~\mathrm{T} \Omega$, with resistance variations ranging from$1.7 ~\mathrm{T} \Omega$to$1.8 ~\mathrm{T} \Omega$across process variations. The chip design was fabricated using a CMOS 65 nm process and demonstrated resistances of up to$1.87 ~\mathrm{T} \Omega$in measurements.

Fields of Study & Subjects

Analog and Mixed-Signal Circuit Design Radio Frequency Integrated Circuit Design Low-power high-performance VLSI design

Publication details

Journal / source
IEEE Latin American Symposium on Circuits and Systems (LASCAS)
Pages
1–5
Publication date
24 February 2026
Language
EN