A Single-Layer Printed Cross-Dipole Antenna With Small Footprint and Ultrawide Axial-Ratio Beamwidth
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
A single-layer circularly polarized (CP) printed cross-dipole antenna featuring a compact size and an ultrawide 3-dB axial ratio (AR) beamwidth is presented. To address the severe input resistance reduction in the fundamental series resonant mode induced by ground-plane image currents, the parallel resonant mode of the low-profile printed dipole is utilized. For miniaturization, shorting pins are loaded at the dipole's equivalent electric wall, transforming the parallel resonance into a half-mode operation, and substantially reducing the resonant frequency. Subsequently, near-field resonant parasitic (NFRP) technique is employed to effectively reduce the associated high impedance, facilitating source matching. Owing to the inherent high polarization purity of the printed dipole, CP radiation is readily generated by implementing a fan-shaped cross-dipole radiator with a dimension perturbation on one arm. Benefitting from its specific symmetrical structure, this single-layer antenna achieves an exceptionally wide AR beamwidth. The final design attains a compact footprint of 0.0419λ02×0.042λ0 while providing 3-dB AR beamwidths of 219° and 192° in the xz- and yz-planes, respectively.
Fields of Study & Subjects
Antenna Design and Analysis
Advanced Antenna and Metasurface Technologies
Microwave Engineering and Waveguides
Publication details
- Journal / source
- IEEE Antennas and Wireless Propagation Letters
- Volume
- 25
- Issue
- 5
- Pages
- 2335–2339
- Publication date
- 30 March 2026
- Language
- EN