A 1.1-nJ/Conversion RC -Discharge-Based Resistance Sensor With ±0.65% (3 σ ) 1 -Point Trimmed Inaccuracy in 0.18- μ m CMOS Technology

View at publisher Summarise with VIRAT
Authors: Mu Wu, Yihang Cheng, Xingli Cui, Sining Pan, Huaqiang Wu
Cited by: 0
References: 13

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This letter presents an energy-efficient RC discharge-based sensor readout circuit for sub-kΩ resistance measurements. A SAR logic is implemented to adjust the DAC capacitor array to equalize the RC time constants of the resistance-sensing and DAC branches, thereby eliminating the high static current required to bias the small sensing resistor. To further reduce power consumption, the sensing branch with a large discharging capacitor is triggered only once per conversion. Fabricated in a standard 0.18μm CMOS technology, the sensor achieves a competitive energy efficiency of 1.1nJ/conversion and a fast conversion time of 2.4μs. With the auto-zeroing technique, it achieves a 3σ inaccuracy of ±0.65% after 1-point calibration over a resistance range from 150Ω to 250Ω.

Fields of Study & Subjects

Analog and Mixed-Signal Circuit Design Sensor Technology and Measurement Systems Low-power high-performance VLSI design

Publication details

Journal / source
IEEE Solid-State Circuits Letters
Volume
9
Pages
109–112
Publication date
1 January 2026
Language
EN