Performance Optimization of Tin-Based Perovskite Photovoltaic Cell with CZTS as Hole Extraction Layer

View at publisher Summarise with VIRAT
Authors: Santosh Dubey, R. K. Chauhan
Cited by: 0
References: 33

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The lead-based perovskite Photovoltaic cells (PSCs) have gained a lot of attention over the past few years owing to its high efficiency and rapid technological evolution. However, their high performance despite it, toxic lead consumption is among the largest challenges to high commercialization because it poses environmental hazards and potential health hazards during production, operation, and disposal. In an attempt to address this dilemma, researchers have begun to explore less harmful options and one of the possible options is the implementation of tin-based perovskites. This paper examined the Sn-based perovskite CH3NH3SnI3 as absorber layer as a substitute of lead and as well as, ascertained the existence of a viable photovoltaic device. The proposed device architecture will include fluorinated tin oxide (FTO) as a conductive oxide layer (TCO), TiO2 as electron extraction layer (ETL), CH3NH3SnI3 as the light-absorbing layer, and copper-zinc-tin-sulfide (CZTS) as the hole extraction layer (HTL). The rear contact was selected to be Gold (Au) since this is stable and has good energy correspondence. The device was modeled with the SCAPS-1D and the dopant concentrations of absorber, HTL and ETL were optimized to 106, 109 and 1010 cm−3, respectively. The results shows that higher total defect density results in lower energy conversion efficiency. Ideally, the PSC consisting of tin gave a PCE of 22.82 Voc of 0.856 V, Jsc of 32.98 mA/cm2, and the squareness factor of 79.71%. All the above findings indicate that the tin-based perovskites possess higher potential of replacing the traditional lead-based PSCs and rendering them a cleaner and promising future.

Fields of Study & Subjects

Perovskite Materials and Applications Organic Electronics and Photovoltaics TiO2 Photocatalysis and Solar Cells

Publication details

Journal / source
International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC)
Pages
211–216
Publication date
20 February 2026
Language
EN