Analysis of SynRM Drive Through Optimized PI Controller Design

View at publisher Summarise with VIRAT
Authors: Anjali Gupta, Sushma Gupta, Shweta Singh
Cited by: 0
References: 14

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This drive performance of a Synchronous Reluctance Motor (SynRM) is investigated on a multi modal speed track. The PI gains of the drive for speed and current loops i.e$d$and$q$axis currents, are obtained under a coordinated optimization framework developed in this paper by the selection of suitable bandwidth ($\omega$ni) and damping ratio ($\zeta$i). Initially, the gains are determined using a pole placement method, after which they are further refined through bandwidth-based optimization process. Simulation results by the obtained optimized PI gains on multi track reference speed shows zero steady state error, i.e no speed ripples, fast response i.e settling time of approximately 0.28 s, with a small overshoot of 1.8% without adjusting these six PI gains as often practiced in hit and trial approaches. On increased loads of 10 Nm, 30 Nm, and 50 Nm, the corresponding speed drops were$3.38 \%, 6.88 \%$, and 12.71% respectively, with settling times of$0.08 ~\mathrm{s}, 0.10 ~\mathrm{s}$, and 0.13 s, respectively are under acceptable limits.

Fields of Study & Subjects

Sensorless Control of Electric Motors Electric Motor Design and Analysis Advanced Control Systems Design

Publication details

Journal / source
International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC)
Pages
124–129
Publication date
20 February 2026
Language
EN