Quench Propagation Characteristic of REBCO Stacks Under Conduction-Cooled Conditions

View at publisher Summarise with VIRAT
Authors: Qing Pang, Hui Yu, Yafei Tao, Bowen Xie, Bohan Tang, Shili Jiang, Xiangyang Wu, Donghui Jiang, Guangli Kuang
Cited by: 0
References: 43

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Due to the limited current-carrying capacity of a single high-temperature superconducting (HTS) tape, multiple tapes are often connected in parallel for high-field applications. Therefore, investigating the quench propagation characteristics of HTS stacks is crucial for ensuring the safe operation of HTS devices. Compared with liquid nitrogen immersion cooling, conduction-cooled quench tests are performed in a quasi adiabatic environment, minimizing environmental effects and allowing the results to more accurately reflect the intrinsic quench characteristics of the HTS stack. In this study, we investigate the quench propagation characteristics of REBCO stacks under conduction-cooled conditions. The stacks were fabricated using 4 mm-wide REBCO tapes, and a conduction cooled quench test platform was built based on a GM cryocooler to perform measurements under near-adiabatic conditions. Potential taps were placed continuously along the length of the sample to monitor quench propagation, while thermocouples were attached to measure the temperature distribution. The minimum quench energy (MQE) and normal zone propagation velocity (NZPV) of the REBCO stacks were measured at ambient temperatures ranging from 60 K to 77 K. The experimental results are compared with those of a single tape sample. To verify the thermal behavior of the REBCO stack, a numerical analysis of the temperature trace was performed using the Finite Element Method (FEM). The numerical simulation results were compared with the experimental data to verify the validity of the experimental data. The results indicate that differences in the coefficient of thermal expansion between the solder and the tapes during the cooling process led to a reduction in the critical current of the REBCO stack. As the temperature increases, both types of samples exhibit a decrease in MQE and a slowdown in NZPV. The heat absorption of the solder during quench increases the MQE of the stacked HTS tapes. Meanwhile, it also enhances the Joule heating power within the normal zone, and accelerates the NZPV.

Fields of Study & Subjects

Superconducting Materials and Applications Physics of Superconductivity and Magnetism Particle accelerators and beam dynamics

Publication details

Journal / source
IEEE Transactions on Applied Superconductivity
Volume
36
Issue
4
Pages
1–9
Publication date
26 March 2026
Language
EN