Compact Broadband MIMO Antenna Design and Test for the Brazilian TV 3.0

View at publisher Summarise with VIRAT
Authors: Marcelo Bender Perotoni, T. Cordaro, Marcos R. Vieira, Edson Tafeli C. dos Santos, Yuri Pontes Maciel, Cristiano Akamine
Cited by: 0
References: 18

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This article describes the challenge of a Multiple-Input Multiple-Output (MIMO) array for Brazilian Digital TV 3.0. The chosen Advanced Television Systems Committee (ATSC) 3.0 system is the first worldwide to employ$2\times 2$MIMO antennas, which, in view of the unpredictable indoor environment and long wavelengths, is an engineering challenge. The design, focused on mass indoor environments, is oriented towards a compact, low-cost, and planar radiant system. Since the required bandwidth spans the Very High Frequency (VHF) and Ultra High Frequency (UHF) ranges, miniaturization is the first compromise rather than the standard reflection-loss parameter. Aprototype is constructed and tested inside a building room using as reception a test signal broadcast at the center frequency of 177.1428571MHz, and additionally with four different carriers (177.143MHZ, 277.143MHZ, 587.143MHz and 695.142MHZ), within an anechoic chamber. The proposed compact planar antenna covers the 174–698MHz band with envelope correlation coefficients below 0.1 and achieves realized gains of nearby 0dB. Tests in broadcast and anechoic environments confirmed its broadband performance and suitability for low-cost indoor MIMO reception in Brazil’s TV 3.0 system.

Fields of Study & Subjects

Antenna Design and Analysis Electromagnetic Compatibility and Measurements Telecommunications and Broadcasting Technologies

Publication details

Journal / source
IEEE Transactions on Broadcasting
Volume
72
Issue
2
Pages
705–712
Publication date
1 April 2026
Language
EN