Dual-Path Capacitor Voltage Discharge for NPC Inverter Using External Circuits and Motor Winding

View at publisher Summarise with VIRAT
Authors: Abhinay Pratap Singh, Rajesh Gupta, Sandeep Ojha
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Neutral Point Clamped (NPC) inverters are widely adopted in medium and high-power drives due to their reduced harmonic distortion and device voltage stress. However, maintaining the balance of the split DC-link capacitors remains a major challenge. For a permanent magnet synchronous motor (PMSM) based electric vehicles (EVs), during emergency condition, e.g., accident or crash, these balanced capacitors need to be discharged rapidly maintaining voltage balance. This paper proposes a dual-path capacitor voltage discharge in the balancing circuit as well as in the windings of the motor with voltage balancing strategy. It integrates an external discharge with the natural current paths through the motor windings. The external circuit provides direct control of capacitor voltage, while the motor winding discharge enables dynamic redistribution of stored energy flow through the inverter, during the emergency condition. Coordinated control of these two mechanisms ensures faster discharge, reduced current limit, and stable performance under transient conditions. Simulation results verifies the effectiveness of the proposed method, demonstrating improved voltage balancing and discharge symmetry, making it well-suited for high-power EV drive applications. A real time simulator TYPHOON HIL 402 has been used to run on FPGA based controller to validate the effectiveness of the proposed balance voltage discharge.

Fields of Study & Subjects

Multilevel Inverters and Converters Sensorless Control of Electric Motors Electric Motor Design and Analysis

Publication details

Journal / source
IEEE Transactions on Industry Applications
Pages
1–10
Publication date
1 January 2026
Language
EN