Demagnetization Induced Torque Ripple Minimization in an Open-Winding Permanent Magnet Synchronous Machine

Read full text Summarise with VIRAT
Authors: Abdur Rahman, Rukmi Dutta, Guoyu Chu, Dan Xiao, Minghao Gao, Muhammed Fazlur Rahman
Cited by: 0
References: 44

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In an open-winding permanent magnet synchronous machine (OW-PMSM) with a common DC bus configuration, the zero-sequence current (ZSC) flows through the stator winding due to the inverter-induced zero-sequence voltage and the third harmonic back-EMF. Under healthy conditions, the ZSC primarily consists of the third electrical harmonic. However, under partial demagnetization, additional low-order harmonics appear in the ZSC due to subharmonics and inter-harmonics induced in the phase back-EMF, resulting from asymmetry in the air gap flux density. These additional harmonics contribute to the increased torque ripples and higher losses. This paper proposes a torque ripple suppression strategy based on a proportional-resonant (PR) controller. Moreover, a second PR controller was employed to suppress the additional harmonics in the ZSC. The proposed method effectively reduced the torque ripple from 88% to 16% under the magnet fault conditions. Furthermore, it significantly decreased the total harmonic distortion (THD) of the phase current, lowering it from 32% to 8%. The effectiveness of the proposed control scheme was verified using a 1-kW fractional-slot concentrated-winding (FSCW) OW-PMSM.

Fields of Study & Subjects

Electric Motor Design and Analysis Sensorless Control of Electric Motors Power Quality and Harmonics

Publication details

Journal / source
IEEE Transactions on Industry Applications
Pages
1–17
Publication date
1 January 2026
Language
EN