Active Coupling Control-Based Transient Frequency–Voltage Coordinated Support for Grid-Following Inverters
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The modern power systems with high proportion of renewable energy features “weak frequency” and “weak voltage” characteristics, imposing stringent requirement on the transient frequency and voltage support of grid-following (GFL) inverters in renewable energy generation systems. Existing grid support methods for GFL inverters are unable to simultaneously address both rate of change of frequency (ROCOF) and rate of change of voltage (ROCOV) under grid disturbances such as voltage sags. To overcome this limitation, the proposed method investigates the coupling mechanism between transient frequency and voltage when the grid impedance is of resistive-inductive characteristics. On the basis of this coupling mechanism, a frequency–voltage coordinated support method is proposed by employ an active coupling gain between the active power and reactive power. Compared with the existing method, the proposed method employs the active coupling rather than decouple ideas to enable the joint optimization of transient rate of change of ROCOF and ROCOV, yielding better grid compatibility with wide variation range of short-circuit ratio (SCR) and resistance-to-inductance(X/R) ratio, and smaller extrema of ROCOF and ROCOV. Both simulation and experimental results verified the effectiveness and feasibility of the proposed method.
Fields of Study & Subjects
Microgrid Control and Optimization
Wind Turbine Control Systems
Islanding Detection in Power Systems
Publication details
- Journal / source
- IEEE Transactions on Industrial Electronics
- Volume
- 73
- Issue
- 9
- Pages
- 13015–13026
- Publication date
- 31 March 2026
- Language
- EN