Flow Topology and Particle Clearance in an Inkjet Printing Cleanroom Chamber by Immersed Boundary Method

View at publisher Summarise with VIRAT
Authors: Wei-Hsiang Wang, Jomol Kewin Lewis
Cited by: 0
References: 57

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract Contamination control in inkjet printing cleanrooms is critical yet challenging due to the transient airflow disturbances caused by moving equipment. This study examines how exhaust geometry and suction momentum govern flow topology and particle clearance in such dynamic environments. A scalable computational framework is employed, combining a sharp-interface immersed boundary method (IBM) on a block-structured Cartesian grid with implicit large-eddy simulation (ILES) and a two-way coupled particle-source-in (PSI)-cell particle model. Seven ventilation configurations are simulated, independently varying exhaust aperture, exhaust velocity, and supply jet speed. Performance is quantified by end-of-cycle room balances (retention, removal, and escape ratios) and by a substrate-attached “critical zone” metric. Phase-resolved analysis links particle transport to specific flow structures, including capture layers, recirculation cells, and bypass paths. Results demonstrate that exhaust-side design is dominant: enlarging the outlet or increasing suction establishes a coherent capture layer that eliminates bed-top recirculation, reducing outward particle escape to approximately 1% and reducing critical-zone residue to near zero. In contrast, increasing supply jet velocity enhances impingement and lateral entrainment, raising outward escape to 16–17% without improving clearance. The study reveals the mechanisms controlling dilute, drag-dominated particles and provides a transferable, nondimensional protocol for chamber-scale ventilation design.

Fields of Study & Subjects

Particle Dynamics in Fluid Flows Fluid Dynamics and Turbulent Flows Wind and Air Flow Studies

Publication details

Journal / source
Journal of Fluids Engineering
Volume
148
Issue
7
Publication date
19 March 2026
Language
EN