Mechanics of Liquid Crystal Elastomer Actuators for Granular Penetration

View at publisher Summarise with VIRAT
Authors: ChangHee Son, Yi Li, Shao-Hao Lu, Jaewook Jung, Zizheng Wang, Dar Jankovic, Yi Zhang, Xueju Sophie Wang
Cited by: 0
References: 42

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Subsurface penetration by compliant actuators is limited by the competing requirements of force generation and elastic stability. This work investigates the mechanics of granular penetration using thermally actuated liquid crystal elastomer (LCE) structures, focusing on buckling-limited force output and structural design. Reversible shape programming enabled by liquid crystal alignment and Poisson-effect-induced transverse strain produces controlled axial extension and torsional deformation under thermal actuation. Experiments and numerical simulations show that single-pillar LCE actuators are limited by global buckling. To overcome this limitation, multi-pillar architectures are introduced to increase effective bending stiffness while preserving soft actuation. Specifically, a tri-pillar configuration increases the buckling-limited force capacity by more than an order of magnitude compared to a single pillar. Finite element simulations and buckling analyses quantify the dependence of critical load on elastic modulus, pillar geometry, and pillar number, identifying the governing instability modes under laterally constrained conditions. Sequential penetration cycles are enabled through the integration of shape memory polymer supports that mechanically reset actuator geometry, achieving cumulative penetration depths of up to 24 mm. Measurements of granular resistance further demonstrate that imposed tip rotation substantially reduces external loading and delays buckling. Integration of a flexible temperature sensor into the actuator tip shows the feasibility of in situ subsurface measurement during penetration. These results provide mechanics-based design guidelines for compliant actuators operating under compressive loading in granular environments, including the ocean floor.

Fields of Study & Subjects

Advanced Materials and Mechanics Soft Robotics and Applications Dielectric materials and actuators

Publication details

Journal / source
Journal of Applied Mechanics
Volume
93
Issue
6
Pages
061004
Publication date
28 April 2026
Language
EN