Research on design of full recycled cold-mix cold-laid asphalt mixture based on treatment of road-bridge transition section

View at publisher Summarise with VIRAT
Authors: Huan Zhang, Fei Yang, Haijiao Sun, Junrui Huang
Cited by: 0
References: 8

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

To address the dual demands of efficient treatment of differential settlement disease in road-bridge transition sections and resource utilization of reclaimed asphalt pavement (RAP), this study developed a new type of cold-mix cold-laid full recycled asphalt mixture with high RAP content and established a two-stage performance evaluation system. The mixture uses solvent-based asphalt dispersant as the binder, with RAP content exceeding 80%. Through optimizing aggregate gradation and mix ratio, it achieves normal-temperature mixing and rapid repair. Based on the performance requirements of cold-mix mixtures for "initial opening to traffic and long-term service", a two-stage evaluation method of "initial forming + final forming" was established, clarifying the performance indicators and test standards for each stage. Test results show that under the optimal mix ratio, the initial forming performance of the mixture meets the requirements for rapid opening to traffic (stability at 25℃ is 15.79kN, brushing loss rate is 7.85%), and the final performance reaches the technical standards of hot-mix asphalt mixtures (stability at 60℃ is 15.93kN, dynamic stability against rutting is 1276 times/min). Engineering application verification indicates that the mixture has stable repair effect, can reduce material and construction costs by more than 35%, increase RAP utilization rate to 100%, and has significant engineering value and environmental benefits.

Fields of Study & Subjects

Asphalt Pavement Performance Evaluation Geotechnical and construction materials studies Materials Engineering and Processing

Publication details

Journal / source
International Conference on Advanced Materials and Equipment Manufacturing (AMEM)
Pages
51–51
Publication date
18 March 2026
Language
EN