Design and development of mm-wave communication using narrowband (NB) LNA using induced degeneration topology (IDT)

View at publisher Summarise with VIRAT
Authors: Lava Bhargava, Amit Yadav, Vaishnavi ., Tanish Dugar
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In Recent days the technology shift can be well observed towards a Low-Noise Amplifier (LNA) is typically present in all receivers. The aim of LNA is to enhance the received signal so that it is enough above the noise floor to support additional processing. The noise figure of the LNA will have an immediate impact on the receiver's sensitivity. The receiver circuit, which examines and evaluates the signal received to produce information, heavily depends on low-noise amplifiers. In order to limit interference through amount of loss, LNAs are designed to be placed near the receiving device. They only add a small quantity of noise (unwanted data), as suggested by their name, to the received signal because adding more would significantly disturb the signal, which is already poor. An LNA is used when Signal to Noise Ratio need to decreased by around 50% while the power needs to be raised. LNAs are crucial to communications since they are the first parts of a receiver to catch a signal. The general concept of low noise amplifier and its fundamentals, multi-standards of LNA and two-stage low noise amplifier (LNA), is briefly discussed in this research paper. The starting stage of any RF receiver system is low noise amplifier after the antenna, which is used to increase the antenna's signal output while lowering noise using the same LNA. LNAs are used in communications receiver’s applications such as in satellite communications, wireless LANs (Wi-Fi), cellular telephones, and GPS receivers. It is simple to combine various wireless receivers on a single chip in some of the existing technologies to satisfy the unique requirements for each application. Amplifiers that use this approach benefit from a number of advantages. They accomplish relative low NF, sufficiently voltage gain, wideband input matching, as well as high linearity. Though, the required chip area and power consumption will be enormous. However, feed forward amplifier's power is constrained for reducing the noise of the matching transistor. Therefore, even when the noise is completely cancelled, the LNA's overall gain is constrained.

Fields of Study & Subjects

Radio Frequency Integrated Circuit Design Advanced Power Amplifier Design Microwave Engineering and Waveguides

Publication details

Journal / source
International Conference on Optical and Wireless Technologies (OWT)
Pages
29–29
Publication date
30 March 2026
Language
EN