In Situ Neutron Reflectometry and Electrochemical Impedance Spectroscopy Study of Hydrogen Absorption into Copper during Corrosion by Bisulfide

Sulfide corrosion of Cu is rapid, and hydrogen atoms produced by its cathodic half-reaction could adsorb on the Cu surface and diffuse into the Cu, potentially leading to hydrogen embrittlement. However, in solutions with low concentrations of SH⁻, absorption of hydrogen into Cu is not observed by ex situ hydrogen analysis, although it is unclear whether this is due to the lack of absorption, the outgassing of hydrogen from the Cu before it can be measured, or another mitigation mechanism. Herein, hydrogen uptake into Cu and the development of Cu 2 S layers during corrosion by SH⁻ were studied by in situ neutron reflectometry and electrochemical impedance spectroscopy. The method relies on a 4-nm Ti layer beneath 50 nm of Cu to trap hydrogen that may penetrate the Cu. Additionally, elastic recoil detection analysis and Rutherford backscattering spectrometry were used to measure hydrogen. While no increase in hydrogen was detected in either the Ti or Cu layers, a higher concentration of hydrogen was observed in the outer Cu 2 S layer (2560 ppm) than in the underlying Cu (244 ppm), demonstrating that bisulfide-driven corrosion does not lead to hydrogen absorption into the Cu. These results have implications for deep geological repositories utilizing Cu corrosion barriers.