Real-time control signal rectification and actuation mapping for robot joint control

This paper presents the control signal rectification and actuation mapping (CSRAM) framework, developed to improve the reliability and precision of real-time robot joint control. The framework integrates three modules, namely the drive signal rectifier (DSR), the signal pole detector (SPD), and the rising/downstream detector (RDD), which ensure signal compatibility, dynamic mapping consistency, and directional stability during actuation. Unlike conventional control converters, CSRAM effectively compensates for nonlinearities, latency, and synchronization issues in closed-loop systems. Experimental validation using a hexapod-to-quadruped (Hexaquad) robot showed that the proposed method, when combined with an anti-windup PI controller, reduced steady-state error from 14% to below 1%, improved transient and settling times by 0.3 to 0.4 seconds, and decreased three-dimensional trajectory RMSE by 63.7%. These results confirm that CSRAM provides a low-complexity and computationally efficient preprocessing layer for improving real-time performance in multi-joint and legged robotic systems, with strong potential for adaptive and industrial robotic platforms.