Influence of isostatic pressure on the martensitic transformation of PM HS 3-3-4 high speed steel

View at publisher Summarise with VIRAT
Authors: Stefan Müller, Santiago Benito, Sebastian Weber
Cited by: 0
References: 7

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In order to investigate phase transformations in a hot isostatic press (HIP) with integrated rapid cooling in situ, the electrical conductivity of PM HS 3-3-4 (1.3377) was measured as a function of temperature in the HIP process. This approach leverages the fact that phase changes result in distinct variations in electrical resistance. A four-wire measurement was conducted on a specifically designed PM HS 3-3-4 sheet metal sample. The experimental setup was integrated into the HIP system to determine the martensite start ( M s ) temperature. HIP cycles were performed at an austenitizing temperature of 1000°C under isostatic pressure of 100 MPa. For comparison, unpressurized heat treatments following an identical temperature profile were conducted using a dilatometer to measure the M s temperature. It was shown that the measurement setup with the newly developed sample geometry can be successfully used to determine phase transformations in the HIP. The comparison of the M s temperatures of the samples heat treated under isostatic pressure and without pressure showed that the austenite phase is stabilized by the pressure during quenching, which leads to a shift of the M s temperature to lower values.

Fields of Study & Subjects

Microstructure and Mechanical Properties of Steels Powder Metallurgy Techniques and Materials High Temperature Alloys and Creep

Publication details

Journal / source
Powder Metallurgy
Volume
69
Issue
5
Pages
428–431
Publication date
31 March 2026
Language
EN