Numerical Modelling of the Hydrodynamics and Fluid–Particle Interactions in a Rotatory Vortex Pelleting (RVP) Reactor

View at publisher Summarise with VIRAT
Authors: Benjamin A. Oyegbile
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This chapter presents the application of a computational tool for the numerical analysis and simulation of shear-driven two-phase particulate flow of monodispersed and polydispersed granular materials. A coupled computational fluid–particle dynamics (CFD) model was developed consisting of a steady-state flow field of the continuous phase coupled to a transient particle tracking of the discrete phase. This was achieved via a one-way coupling between the continuous phase and the discrete phase by including the effect of drag, lift, pressure gradient, virtual mass forces, and granular collisional forces in describing the particle–particle, particle–wall, and the fluid–particle interactions. The model was subsequently used to investigate the spatiotemporal evolution of flow pattern, discrete phase properties, and the influence of the operating conditions on the granular properties. The validation of the developed model was carried out based on the theoretical analysis of the rotor-stator flow and the particle image velocimetry (PIV) flow measurements taken from the reactor. The results showed that the particle sizes were uniformly distributed within the reactor after steady-state conditions, while a small region of high particle concentration was observed near the rotor due to low vorticity and turbulent intensity around this region. In terms of the operating conditions, the restitution coefficients and the operating speeds do not have a significant influence on the granular properties apart from the small region around the shaft, where there is a correlation between these parameters. The particle sizes, however, show a positive correlation with the granular properties. Also, a wider particle size distribution, which might be attributed to the pumping effect of the Batchelor flow in the axial direction was observed axially towards the stator. It was also observed that the discrete phase velocity does not seem to vary significantly with the restitution coefficients. Furthermore, the vertical velocity and vorticity profiles showed a good agreement between CFD model predictions and PIV measurements. The minor observed deviations were mainly due to some of the experimental limitations rather than the robustness of the CFD code.

Fields of Study & Subjects

Particle Dynamics in Fluid Flows Granular flow and fluidized beds Fluid Dynamics and Mixing

Publication details

Journal / source
CRC Press eBooks
Pages
98–122
Publication date
25 March 2026
Language
EN
Document type
Book chapter