Geometrically Accurate Real Gearing

View at publisher Summarise with VIRAT
Authors: Stephen P. Radzevich
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In this chapter, geometrically accurate real gearing is considered. A novel design of geometrically accurate real gearing is proposed. The proposed novel system of gearing is referred to as https://www.w3.org/1998/Math/MathML" display="inline"> S p r - Gear System . The discussion begins with the preliminary considerations. The following topics are covered in this chapter: (a) the root causes for the real gears differ from geometrically accurate gears, (b) applied coordinate systems, (c) displacements of a gear axis of rotation from its desirable configuration, and (d) determination of the closest distance of approach between a gear and its mating pinion axes of rotation. This analysis is followed by the discussion of tooth flank geometry in geometrically accurate real gearing, that is, in gears for https://www.w3.org/1998/Math/MathML" display="inline"> S p r - Gear System . The adopted concept for tooth flank generation of gears for https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gear system , preferred reference systems, derivation of equation for tooth flank in https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gearing , angular base pitch in https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gearing , and features of interaction of the tooth flanks in https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gearing , are covered in this section of the book. Then, possibilities of implementation of the concept of https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gearing in the design of two-degrees-of-freedom gearing and the design of gear coupling are analyzed. It is shown that normal distribution of manufacturing errors onto geometry of tooth flanks can be taken into account when designing gears for https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gear system . It is also demonstrated that the concept of https://www.w3.org/1998/Math/MathML" display="inline"> S p r - gearing cannot be used in gear systems with point contact between the tooth flanks of a gear and a mating pinion, such as in design of gears for Novikov/conformal gearing and/or high-conformal gearing . The consideration in this section of the book ends with the analysis of correlation among the gear systems of various kinds, namely, (a) geometrically accurate gear pairs, (b) geometrically accurate real gear pairs, and (c) real (approximate) gear pairs.

Fields of Study & Subjects

Gear and Bearing Dynamics Analysis Advanced Measurement and Metrology Techniques Engineering Technology and Methodologies

Publication details

Journal / source
CRC Press eBooks
Pages
609–646
Publication date
30 March 2026
Language
EN
Document type
Book chapter