Strength of Gear Teeth
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The discussion in this chapter begins with the adopted principal assumptions. The Hertz proportional assumption and the assumption of equal torque share, are the two adopted assumptions in this chapter of the book. This discussion is followed by the analysis of the principal features of low-tooth-count gears , and by the development of an analytical model for calculating contact stress. Formula for the calculation of Hertz contact stress is introduced, and the specific pressure factor is discussed. The discussion of the gear contact strength ends with the calculation of the combined compressive-shear stress in low-tooth-count gearing . Then, the bending strength of gear teeth is discussed. For this purpose, the inconsistency of Lewis’ formula for the calculation of gear teeth bending strength is explained. The effective length of line of contact in a gear pair is considered in detail, including, but not limited to, the length of a single line of contact, as well as the effective length of lines of contact in spur and helical parallel-axes gearing. This discussion is followed by the analysis of loading of the gear teeth. A method of simulation of the interaction of tooth flanks of a gear and its mating pinion is disclosed at the end of this chapter.
Fields of Study & Subjects
Gear and Bearing Dynamics Analysis
Mechanical Engineering and Vibrations Research
Engineering Applied Research
Publication details
- Journal / source
- CRC Press eBooks
- Pages
- 776–820
- Publication date
- 30 March 2026
- Language
- EN
- Document type
- Book chapter