Automatic Delay Control Board and GUI Development for Radio Spectrograph
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The radio spectrographs that use traditional systems experience the problem of the frequency of radio bursts measurement and the probable detection of anomalies during radio transmission due to the manual relay switching and the fixed delay lines. In this project, the automation of the delay shifter control system was done, through which dynamic adjustment of signal pathways as per the solar declination angles calculations in the radio spectrograph greatly restores the exact phase matching and signal path control for radio spectrographs. The solar declination angle is calculated using a Python-based GUI-based solar position algorithm, and then this is communicated using an RS232 interface to the microcontroller. A MAX232 chip carries out the conversion of the solar declination signal levels to TTL logic. Relays that switch between +5V and -5V are controlled by the microcontroller whose programming is done in C using the MPLAB. A delay is imposed on the signals to bring them into phase. This time shift will be beneficial to the radio spectrometer by making the radio spectrograph more efficient and clear. Thus, the capacity for radio transmissions’ reception significantly improves.
Fields of Study & Subjects
Arduino and IoT Applications
Embedded Systems and FPGA Design
Radio Astronomy Observations and Technology
Publication details
- Journal / source
- CRC Press eBooks
- Pages
- 233–238
- Publication date
- 31 March 2026
- Language
- EN
- Document type
- Book chapter