comparative study on physical and mechanical properties of AAC lightweight cellular concrete and Foam concrete blocks

View at publisher Summarise with VIRAT
Authors: Hadil Obaid Said Al Moqbali, Al Thuraiya Mohammed Salim Al Kharusi, Maitha Nasser Hamdoon Al Mamari, Ulla Mohammed Abdulrahim Abdullah Jabri, N. Aravind, Eman Muhye Adeen Muhye Al Hatali
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study aims to compare the physical and mechanical properties of sustainable Autoclave Aerated Concrete (AAC) blocks and foam concrete blocks. In the present study, samples are collected from the construction site and investigated their properties experimentally. The tests conducted on those samples are compressive strength, water absorption and unit weight. The ingredients of AAC blocks are lime, OPC, sand, aluminum powder and water. But foam concrete blocks consist of cement, sand, foam and water. Based on the test, the results revealed that the compressive strengths of AAC blocks and foam concrete blocks ranges from 2.99 to 3.11 MPa and 2.95 to 3.03 MPa respectively. The results proved that the compressive strength of AAC blocks is slightly better than that of foam concrete blocks by 3.27%. However, the compressive strengths of both type of blocks are less when compared to the conventional blocks. Hence, both of the light weight blocks can be used for the construction of non-load bearing walls. Furthermore, from the water absorption test, the average water absorption percentages of AAC and foam concrete blocks are 61.794 % and 61.698% respectively. Similarly, average unit weight of AAC and foam concrete blocks are 4.861 kN/m 3 and 5.301 kN/m 3 respectively. For the preparation both type of blocks, cement consumption is very less when compared to the conventional concrete blocks. Hence, using these blocks helpful for the reduction of carbon dioxide emission and will benefit the environment. Also, these light weight blocks will be helpful in reducing the weight of structural components and the cost of construction will be reduced and supporting the economy of the country.

Fields of Study & Subjects

Concrete and Cement Materials Research Hygrothermal properties of building materials Materials Engineering and Processing

Publication details

Journal / source
CRC Press eBooks
Pages
117–122
Publication date
25 March 2026
Language
EN
Document type
Book chapter