Tribological behaviours of Ni-Al2O3/4%Sn composite coating by electrodeposition technique

View at publisher Summarise with VIRAT
Authors: A. R. Someshwaran, P. Suryaprakash, T. Tamilarasan, P. Tamilarasu, R. Thirunavukkarasu, Priya Sahadevan
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study examined the creation of nanocomposite coatings on Q235 steel using electrodeposition. The coatings investigated are composed of nickel (Ni), alumina (A1203), and alumina with 4% tin (A1203-4%Sn). This study aimed to examine the hardness, corrosion resistance, and tribological properties of nanocomposite coatings. The analysis showed that the Ni, Ni-Al 2 O 3 , and Ni-A1 2 O 3 /4%Sn nanocoatings had high microhardness values with averages of 497, 530, and 554 HV, respectively. The NiAl 2 O 3 /4%Sn nanocoating exhibited a friction coefficient of approximately 0.30. When subjected to a 3.6 wt% NaCl solution at ambient temperature, these nanocoating’s demonstrated superior corrosion resistance, showing minimal deterioration and the lowest corrosion rate of 0.07 mm/year amongst the coatings tested. For Ni Al 2 O 3 /4%Sn composite nano coatings, the coefficient of friction and rate of wear were determined to be minimal at 0.44 and 0.59 mg/min respectively. The incorporation of Al 2 O 3 and Sn nanopartides along with Ni in the Ni– Al 2 O 3 coatings resulted in enhanced resistance to corrosion and wear compared to Ni and Ni–Al 2 O 3 coatings.

Fields of Study & Subjects

Electrodeposition and Electroless Coatings Surface Treatment and Coatings Metal and Thin Film Mechanics

Publication details

Journal / source
CRC Press eBooks
Pages
311–318
Publication date
25 March 2026
Language
EN
Document type
Book chapter