EFFECT OF SILICON DIOXIDE AMORPHOUS ON HYDRATION BEHAVIOR AND STRENGTH DEVELOPMENT OF LOW HEAT PORTLAND CEMENT

Read full text Summarise with VIRAT
Authors: Haoran Xia, Luge Cheng, Yuqi Ren, Ippei Maruyama
Cited by: 0
References: 29

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The compressive strength of the low heat cement paste with replacement ratio by weight of silicon dioxide particles in 0%, 19%, 26% and 41% of and water-to-binder ratio (w/b)of 0.42 were investigated at 1, 3, 7, 14, 28, 56 and 91 days of hydration. The reaction degrees of low heat cement and amorphous silicon dioxide were calculated from quantification results by X-ray diffraction with PONKCS method and selective dissolution method. The results indicate that the filler effect caused by silicon dioxide accelerated the early hydrate on rate of low heat cement, especially earlier than 14 days. A 26% replacement of silicon dioxide was found to provide the greatest improvement in the hydration process. After 91 days of hydration, larger silicon dioxide particles can also reach a reaction level of about 20%. As the silicon dioxide content increased, the compressive strength of the paste gradually decreased, but as hydration progressed, the trend of strength loss gradually decreased, indicating the pozzolanic reaction of silicon dioxide.

Fields of Study & Subjects

Concrete and Cement Materials Research Concrete Properties and Behavior Magnesium Oxide Properties and Applications

Publication details

Journal / source
Cement Science and Concrete Technology
Volume
79
Issue
1
Pages
147–154
Publication date
30 March 2026
Language
EN