Crack repair of aluminium components using glass fibre reinforced polymer composite patches: Effect of patch thickness on tensile behaviour

Read full text Summarise with VIRAT
Authors: Nurul Naqirah Shukor, Aidy Ali, Nurul Afira Syakirah binti Mohd Amin, Hasmeda Erna Che Hamid, Hafizah Ariff, Mohd Nor Faiz Norrrahim
Cited by: 0
References: 24

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Crack propagation in metallic structures is a critical issue in industries such as aerospace, oil and gas, and automotive, where conventional repair methods such as welding or part replacement are often costly and time-consuming. This study investigates the effectiveness of Glass Fibre Reinforced Polymer (GFRP) composite patches for repairing cracked aluminium sheets. Centre- and edge-notched specimens with crack lengths of 5, 10, and 15 mm were fabricated and repaired using hand lay-up GFRP patches of varying thicknesses (two and four layers). Tensile tests were performed according to ASTM E8 to evaluate the mechanical performance of repaired specimens compared with unrepaired samples. The results demonstrated that composite patches significantly improved the load-carrying capacity of cracked specimens, with thicker patches providing higher strength recovery. Specifically, specimens with four-layer GFRP patches produced the highest maximum stresses of 152.44 MPa and 184.67 MPa for edge and centre cracks of 5 mm, respectively, compared with substantially lower strengths in unrepaired samples. An increase in patch thickness led to greater tensile-strength recovery; however, this improvement must be weighed against weight considerations, particularly in weight-sensitive applications such as aerospace structures.

Fields of Study & Subjects

Mechanical Behavior of Composites Fatigue and fracture mechanics Material Properties and Applications

Publication details

Journal / source
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES
Volume
20
Issue
1
Pages
11027–11035
Publication date
29 March 2026
Language
EN