ЭНЕРГЕТИЧЕСКАЯ ЭФФЕКТИВНОСТЬ ВВОДА/ВЫВОДА ИЗЛУЧЕНИЯ В ПЛАНАРНЫХ ВОЛНОВОДАХ ПРИ ИСПОЛЬЗОВАНИИ ГОЛОГРАФИЧЕСКИХ ОТРАЖАТЕЛЬНЫХ РЕШЁТОК

View at publisher Summarise with VIRAT
Authors: Е. Ф. Пен
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Получены и проанализированы экспериментальные данные об энергетической эффективности (ЭЭ) ввода/вывода излучения на всём пути его распространения в среде фотополимерных голографических решёток и планарного волновода. Установлено, что основной вклад в потери мощности излучения вносят поглощение в среде фотополимера из-за неполного обесцвечивания красителя при постобработке голограмм, а также их относительно малая дифракционная эффективность (ДЭ). Вследствие недостаточного согласования спектральных характеристик отражательных голограмм и LED-дисплеев лишь часть мощности их излучения используется в виде полезного сигнала. С учётом полученных экспериментальных данных итоговая оценка ЭЭ составила ~10 % относительно мощности излучения LED на входе всей структуры решётки ввода/вывода-волновод. Для повышения этой величины следует применять регистрирующие среды с малой толщиной (менее 10 мкм) и одновременно с большой амплитудой фотоиндуцированного изменения показателя преломления, которые могут обеспечить необходимые ДЭ и степень согласования указанных спектральных характеристик, а также снизить поглощение в среде фотополимера. В этом случае ожидаемое значение ЭЭ может достичь ~40 %. Experimental data on the energy efficiency (EE) of input/output of radiation along its entire propagation path in the medium of photopolymer holographic gratings and a planar waveguide were obtained and analyzed. It was found that the main contribution to radiation power losses is made by absorption in the photopolymer medium due to incomplete bleaching of the dye during post-processing of holograms, as well as their relatively low diffraction efficiency (DE). Due to insufficient matching of the spectral characteristics of reflection holograms and LED displays, only part of their radiation power is used as a useful signal. Taking into account the obtained experimental data, the final estimate of the EE was ~ 10 % relative to the LED radiation power at the input of the entire "input/output gratings - waveguide" structure. To increase the efficiency, it is necessary to use recording media with a small thickness (less than 10 μm) and, at the same time, with a large amplitude of photoinduced change in the refractive index, which can provide the necessary DE and the degree of matching of the specified spectral characteristics, as well as reduce absorption in the photopolymer medium. In this case, the expected EE value can be ~ 40 %.

Fields of Study & Subjects

Photorefractive and Nonlinear Optics Advanced optical system design Photonic and Optical Devices

Publication details

Journal / source
Optoelectronics Instrumentation and Data Processing
Volume
62
Issue
1
Pages
106–116
Publication date
27 February 2026
Language
RU