Development of a photo redox flow battery based on nanostructured semiconducting metal oxides as photoanodes

Read full text Summarise with VIRAT
Authors: Mirco Ade
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In this thesis, semiconducting electrodes are investigated for the application of the photo redox flow battery. Thus, a Photo Redox Flow Battery was designed and constructed to enable continuous flow charging during light illumination. As electrode materials were WO₃ and Mo:BiVO₄ chosen and optimized in the water oxidation reaction in advance. The goal was to build a WO₃/Mo:BiVO₄ heterostructure with high performance for effective charging. The investigation starts with the WO₃ base for electron extraction. A detailed coating study showed that optimizing the interface by adjusting the seed layer density can influence the performance of the electrode. The highest photocurrent of 1.51 mA cm⁻² was achieved by a hydrothermally grown electrode using a seed layer synthesized with 5000 rpm and 30 s spinning duration. It resulted in a 2.3 µm thick film with a flat band potential of 0.39 V, an IPCE of 60 % and a separation efficiency of 34 % without using a cocatalyst. Subsequently, the formation of the WO₃/Mo:BiVO₄ heterostructure was analyzed in detail. The dip-coating parameters, the role of the individual materials and their contribution to the heterostructure, as well as different morphologies of WO₃, were evaluated. The performance was found to be better when Mo:BiVO₄ serves as the absorber and WO₃ functions as the electron extractor for charge carrier separation. Additionally, it was shown that different layer structures can be achieved by adjusting the dip coating parameters regardless of the WO₃ morphology. In addition, the conversion of WO₃ to α-SnWO₄ was studied in this work using a hydrothermal and a coating approach. Finally, the synthesized electrodes were used in the photo redox flow battery. The stability of the electrodes and the optimal operating voltage for photo-assisted charging of the battery were investigated.

Fields of Study & Subjects

Advanced Photocatalysis Techniques Aqueous and Flow Batteries TiO2 Photocatalysis and Solar Cells

Publication details

Journal / source
EPub Bayreuth (University of Bayreuth)
Publication date
1 January 2026
Language
EN
Document type
Thesis