Preparation of Electrode Materials from Powders Obtained by Electroerosion Dispersion

Read full text Summarise with VIRAT
Authors: Зайцев Дмитрий Викторович, Danila P. Sunin, Roman V. Akishin, Mikhail A. Gerasimov, Danil A. Sergunov
Cited by: 0
References: 10

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Introduction. Machine components contain parts made of non-ferrous metals and alloys, such as bronze. The surfaces of these parts wear out during operation, which leads to the need for their restoration. One of the most versatile and at the same time energy-efficient methods of restoring worn surfaces of parts is electric spark treatment. This process makes it possible to improve the operational properties of the parts, restoring their original dimensions. In this regard, the creation of electrodes from finely dispersed powdered materials is becoming an important direction. The purpose of the study is to develop a technology for manufacturing electrodes for electric spark processing based on powders obtained by electroerosion dispersion. Materials and methods. Bronze powder BrKMc 3-1, obtained by electroerosion dispersion, was used for sintering. Sintering was carried out in the spark plasma sintering system SPS 10-3. For the preparation of samples and their subsequent analysis, the following were also involved: drying cabinet SHS-80-01 SPU, a set of sieves conforming to GOST 2715-75 standard, analytical scales of the Acculab ALC-210d4 brand and the Jingpu MX-2 X-ray fluorescence spectrometer. Results. As a result of sintering, a billet with a diameter of 40 millimeters and a height of 20 millimeters was obtained. The chemical composition of the sintered electrodes is comparable to that of the original scrap metal. During trial welding, sintered bronze electrodes provided the formation of coatings that are not inferior in physico-mechanical and tribotechnical parameters to coatings obtained with a standard electrode material. Discussion and conclusion. By the method of spark plasma sintering, it is possible to obtain electrodes from bronze powder materials obtained by electroerosion dispersion. These electrodes have properties suitable for their use in the process of electric spark processing.

Fields of Study & Subjects

Powder Metallurgy Techniques and Materials Additive Manufacturing Materials and Processes Advanced Machining and Optimization Techniques

Publication details

Journal / source
Ogarev-online
Volume
14
Issue
1
Pages
88–97
Publication date
31 March 2026
Language
EN