MODELING OF THE INFLUENCE OF SHIELDING GAS COMPOSITION ON THE GEOMETRY OF THE DEPOSITED LAYER IN WIRE ARC ADDITIVE MANUFACTURING (WAAM)
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Purpose. To develop a generalized theoretical approach for describing the influence of shielding gas composition on the geometry of the deposited layer in the WAAM process, taking into account arc thermophysics, surface phenomena, and the thermohydrodynamics of the weld pool. Research methods. Methods of analysis and generalization of scientific publications, the principles of heat transfer theory and fluid mechanics with a free surface, physical modeling of thermocapillary convection, as well as a semi-empirical mathematical description based on the introduction of integral gas-environment indices. Results. A cause-and-effect framework describing the influence of shielding gas composition on effective heat input, melt surface activity, and the geometric parameters of the deposited layer was developed. A gas thermophysical index (GTI) was proposed to characterize the effect of the gas mixture on the thermal state of the arc, and a gas activity index (GAI) was introduced to reflect the influence of active components on the thermocapillary response of the molten pool. A structure of semi-empirical model was constructed, relating gas composition to bead width, layer height, and penetration depth. Sciettific novelty. An integrated approach describing the influence of shielding gas on the formation of deposited-layer geometry in WAAM is proposed, in which the gas environment is considered as a physically meaningful process parameter. For the first time within the framework of this formulation, a system of integral indices, GTI and GAI, has been introduced for the formalized consideration of the thermophysical and chemical-surface channels through which gas mixture affects the process. Practical value. The obtained results may serve as a theoretical basis for selecting shielding gas composition, predicting deposited-layer geometry, further calibration of the model using experimental data, and developing process control algorithms for WAAM.
Fields of Study & Subjects
Additive Manufacturing Materials and Processes
Welding Techniques and Residual Stresses
Vacuum and Plasma Arcs
Publication details
- Journal / source
- New Materials and Technologies in Metallurgy and Mechanical Engineering
- Issue
- 1
- Pages
- 68–78
- Publication date
- 31 March 2026
- Language
- EN