Correlation between MBN and reverse transformation of martensite by heat treatments in AISI 304

Read full text Summarise with VIRAT
Authors: Miriam Rocío Neyra Astudillo, Cristina Spinosa, María Isabel López Pumarega, Martín Gómez
Cited by: 0
References: 18

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

ABSTRACT Austenite reversion, α'-martensite → γR-austenite reverted phase transformation, in AISI 304 steel was investigated. All the specimens had been subjected to a one-hour austenitizing heat treatment at 1050 °C in vacuum and with air cooling. Then, they were laminated at –70 °C, with a resulting total reduction of 63%. Finally, the samples thus generated were individually subjected to thermal annealing treatments for 1 hour, with increasing temperatures between 300 °C and 950 °C. In addition to microstructural changes and Vickers microhardness, the reversal process was studied through magnetic measurements: magnetic saturation and magnetic Barkhausen Noise (MBN). These measurements were carried out at room temperature. A temporal analysis of the MBN signals was done and their RMS (Root Mean Square) values were calculated. A similar trend was observed for the RMS of the MBN and the α' martensite contents, beyond the intrinsic differences in the techniques used to perform the measurements. Both techniques allow observing the evolution of the content of α' martensite or ferromagnetic phase as the temperature of the thermal reversion treatment increases.

Fields of Study & Subjects

Microstructure and Mechanical Properties of Steels Shape Memory Alloy Transformations Magnetic Properties and Applications

Publication details

Journal / source
Matéria (Rio de Janeiro)
Volume
31
Publication date
1 January 2026
Language
EN