Ultrasonically dispersed Al–B4C composites with engineered interfaces and graphene tribofilms for high energy efficiency applications
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
ABSTRACT Aluminum–boron carbide (Al–B4C) composites have shown promise as lightweight, wear-resistant materials; however, weak particle–matrix bonding, melt-stage clustering, and unstable friction have limited reliability. Addressing these linked defects is essential for high-strength components. Prior work did not vary the interface design, dispersion, and solid lubrication simultaneously within a single process history, leaving the synergy untested. This study aimed to determine whether engineered interphases produced by ultrasonic dispersion and trace 2D lubricants increased the tensile strength and stabilised sliding wear. A balanced factorial crossed interphase route (electroless Ni–P, sol-gel TiO2→TiC, in situ Ti/B), ultrasonication on/off, and graphene or hBN at 0–1.0 wt. %; XRD/EDS, interphase-thickness and dispersion statistics, and quantitative masks for pull-out and tribofilms supported the analysis. Tensile and pin-on-disk tests yielded wear, friction, and UTS. Graphene-bearing hybrids with Ni–P or in-situ Ti/B maintained UTS ≥330 MPa and reduced wear to ≤0.2 mm3·m−1 with steady friction near 0.20; transfer films reached 65–80% coverage and 95–105 nm median thickness. Ultrasonics sharpened the TiC interfacial coherence and reduced particle pull-out. The results indicated that metallurgical or ceramic interphases paired with graphene produced a low-wear, high energy efficiency on the strength–wear map and surpassed states.
Fields of Study & Subjects
Aluminum Alloys Composites Properties
Tribology and Wear Analysis
Advanced Welding Techniques Analysis
Publication details
- Journal / source
- Matéria (Rio de Janeiro)
- Volume
- 31
- Publication date
- 1 January 2026
- Language
- EN