Photocatalyst testing and development

Read full text Summarise with VIRAT
Authors: Rachel Andrews
Cited by: 0
References: 105

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This thesis is concerned with the development of more appropriate and sensitive testing methods to enable the analysis and comparison of photocatalytic ability for photocatalytic materials with a range of activities. A significant part of this thesis is dedicated to the development and examination of the ISO 22197-1:2016 for NO removal (NO ISO) using commercial “self-cleaning” materials, including the impact of the formation of a surface layer of HNO3, resulting in decreasing NO and NOx removal activity with increasing irradiation time. In addition to this the effect of accelerated weathering on the NOx removing activity exhibited by exterior photocatalytic paints is explored, this work was carried out in collaboration with Prof. J. Krysa at UCT in Prague. Throughout this work it was found that no significant photocatalytic activity occurred without “standard” accelerated weathering (cycles of 0.76 mW cm-2 , 8 h at 50 oC, followed by 4 h at 60 oC in the dark), although two samples were also activated by ‘condensation-only’ weathering (cycles of 4 h at 60 oC in the dark), due to the initial loss of surface silicate binder. A supersensitive test (SST) for photocatalytic activity was developed to assess the activities of materials that show little, if any activity when tested using the NO ISO. An expression is derived which relates rate, thereby photocatalytic activity, directly to the average %NO removed, measured under either standard ISO or SST conditions, where the latter value is directly related to the photocatalytic area, A, and the reciprocal of the flow rate, 1/f. This relationship allows all %NOrem values < 25%, measured using either standard ISO or SST conditions, to be combined to create a universal scale of photocatalytic activity. This work identified commercial photocatalytic materials, such as tiles, that were of such low activity that even this test was unable to measure the activity leading to the development of a new silver ion photocatalytic activity indicator ink, paii that can probe even very low activity photocatalytic materials via a striking colour change from colourless to brown-black upon illumination with UV light. During this work, it became apparent that the photodeposition of Ag metal onto commercial photocatalytic films such as that on self-cleaning glass, could be used to produce highly conducting wires, investigated initially for demisting purposes. A study of Ag-particle growth on sol-gel TiO2 films demonstrated the necessity of overlapping island growth of the Ag-particles to enable conduction.

Fields of Study & Subjects

TiO2 Photocatalysis and Solar Cells Advanced Photocatalysis Techniques Building materials and conservation

Publication details

Journal / source
Research Portal (Queen's University Belfast)
Publication date
1 October 2026
Language
EN
Document type
Thesis