Autothermal CaO looping biomass gasification

Read full text Summarise with VIRAT
Authors: Shuming Zhang
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Biomass gasification is considered a promising renewable energy technology to address climate change caused by greenhouse gas emissions and produce portable and clean energy products. However, biomass gasification has several challenges including poor syngas quality, low process energy efficiency and ash sintering. Autothermal CaO looping biomass gasification is directly maintained by the thermal compensation of carbonation reaction, which can maximize the production of combustible gas and reuse carbon dioxide in the flue gas. Firstly, the experiments were conducted in a lab-scale two-stage fixed bed reactor, and the results indicated that similar H2 yield could be obtained via autothermal CaO looping biomass gasification technology at lower operating temperatures. Sequentially, the inhibition of the sintering of simulated ashes (silica, potassium oxide and alumina) was investigated. Thirdly, the promotion of biomass gasification using thermal compensation generated in situ by CaO-CO2 in a fixed bed reactor was studied with emphasis. In addition, the effect of steam on the regeneration of CaO was also determined during biomass gasification from an energy-saving perspective. Lastly, a comparison between the autothermal CaO looping biomass gasification and sorption enhanced gasification were carried out based on the Aspen plus simulation and economic analysis with parameters including natural gas consumption, annual CO production, process energy efficiency, the total annual cost and the CO cost.

Fields of Study & Subjects

Chemical Looping and Thermochemical Processes Thermochemical Biomass Conversion Processes Carbon Dioxide Capture Technologies

Publication details

Journal / source
Research Portal (Queen's University Belfast)
Publication date
1 October 2026
Language
EN
Document type
Thesis