Superconducting bearings based on closed HTS tape windings

Read full text Summarise with VIRAT
Authors: Maxim Osipov, Aleksandr S. Starikovskii, Irina V. Martirosian, D. A. Aleksandrov, Покровский Сергей Владимирович
Cited by: 0
References: 25

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

AIM: This work aimed to analyze the feasibility of contactless bearings based on closed high-temperature superconducting (HTS) tape windings. To study the axial load on a bearing in a wide temperature range. METHODS: The bearing load was measured using an experimental setup based on a strain gauge and a three-dimensional positioning system. The superconductor was cooled using a single-stage cryocooler. The magnetic interaction in the bearing was calculated in the COMSOL Multiphysics simulation environment. RESULTS: The relationships between the axial force and the axial shift of a superconducting bearing based on closed HTS windings were obtained for temperatures ranging from 40 to 77.4 K and shift amplitudes of 1 to 9 mm. The numerical model was verified using experimental data. Its applicability was proven for closed superconducting currents in HTS tapes. The dynamics of magnetic flux penetration into HTS windings was calculated. CONCLUSION: Closed HTS windings can be successfully used to manufacture superconducting bearings. Closed HTS windings are most effective in systems where equilibrium shifts exceeding the half-period of the magnetic array are possible. The shift magnitude at which the greatest axial restoring force is achieved increases with temperature.

Fields of Study & Subjects

Magnetic Bearings and Levitation Dynamics Superconducting Materials and Applications Electric Motor Design and Analysis

Publication details

Journal / source
Modern Transportation Systems and Technologies
Volume
12
Issue
1
Pages
18–38
Publication date
25 March 2026
Language
EN