Research data for "Multi-tortuous acoustic materials"

Read full text Summarise with VIRAT
Authors: Tomasz G. Zieliński
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This dataset contains research data used to prepare the publication:T.G. Zieliński, M.-A. Galland, "Multi-tortuous acoustic materials", Journal of Sound and Vibration 621 (2026) 119433. https://10.1016/j.jsv.2025.119433This research was supported by: (1) (Polish) National Science Centre (NCN), Poland, under grant agreement 2021/41/B/ST8/04492; (2) LABEX CeLyA (ANR-10-LABX-0060) of Universite de Lyon, within the program "Investissements d'Avenir" (ANR-16-IDEX-0005) operated by the French National Research Agency (ANR).All data are provided in columns in ASCII (.txt) files. These files contain data on the sound absorption coefficient measured and calculated for the proposed multi-tortuous material.The measurement results were obtained using a Bruel&Kjaer impedance tube measurement kit. All measurement data are contained in a single file with a name starting with "EXPERIMENT". The first column (labeled "Freq") contains the frequencies, while the subsequent columns contain the sound absorption values ​​at the corresponding frequency measured for various sample configurations in the impedance tube. These configurations are indicated by the each column label, namely:"0mm-Taped" - the back side of the 3D printed material sample was taped and set on a rigid wall;"0mm" - the back side of the 3D printed sample was set directly on a rigid wall;"5mm" - there was a 5mm air gap between the rigid wall and the back of the 3D printed sample;"10mm" - there was a 10mm air gap between the rigid wall and the back of the 3D printed sample.The file with a name beginning with "COMSOL-DNS" contains the results of a Direct Numerical Simulation performed using COMSOL Multiphysics software. This is the sound absorption coefficient calculated in the considered frequency range for the designed multi-tortuous material.The file with a name beginning with "MATLAB-MPEF" contains the results obtained using the proposed Multi-Pressure-Equivalent-Fluid (MPEF) model. This is the sound absorption coefficient calculated using MATLAB in the considered frequency range for the designed multi-tortuous material.

Fields of Study & Subjects

Acoustic Wave Phenomena Research Cellular and Composite Structures Ultrasonics and Acoustic Wave Propagation

Publication details

Journal / source
RepOD
Publication date
1 January 2026
Language
EN
Document type
Dataset