Correlation of input pressure fluctuations and fluidized bed structure
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The objective of this study is to demonstrate the relationship between reactor inlet pressure fluctuations and the spatial structure of a fluidized bed using a 50,000 t/year wastewater sludge oxidation reactor as an example. A tubular collector is used to fluidize the bed in the reactor, for which similar data are not available in the literature. The study was conducted using three-dimensional numerical modeling. Inlet pressure monitoring data and reactor bed video recordings were used for comparison with calculations. It is shown that pressure fluctuations at the reactor inlet and at various points along the bed height correlate, with the degree of correlation decreasing with distance from the reactor inlet. Spectral analysis of inlet pressure fluctuations revealed a coincidence of the main oscillation frequencies in the range of 0.8–1.0 Hz in both calculations and experiments. A comparison of the bed surface dynamics between calculations and experiments revealed that the process of large bubble formation, which underlies the hydrodynamic pattern in the bed, is similar in both calculations and experiments. Information on the degree of correlation between inlet pressure variations and the fluidized bed structure is useful for determining the current state of the catalyst bed, which contributes to reliable control of the reactor and the process as a whole.
Fields of Study & Subjects
Granular flow and fluidized beds
Heat and Mass Transfer in Porous Media
Fluid Dynamics and Mixing
Publication details
- Journal / source
- Kataliz v promyshlennosti
- Volume
- 26
- Issue
- 2
- Pages
- 94–104
- Publication date
- 30 March 2026
- Language
- EN