Performance and lifetime of lithium-ion batteries : influence of operating conditions and cell design
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Man-made climate change demands significant reduction of greenhouse gas emissions, particularly within the energy and transportation sectors. To enable the widespread adoption of renewable energies, efficient energy storage technologies are essential, with lithium ion batteries (LIB) playing a central role in both stationary energy storage and electric vehicles. The requirements for LIBs in electric vehicles are especially challenging, including high safety standards, high energy density, long lifetime, low cost, fast charging capabilities, and reliable performance across a wide temperature range. To enhance both performance and lifetime, a comprehensive understanding of the influence of the temperature and other cycling conditions on the material characteristics is required to optimize active materials, cell design, and the battery management system. In this context, this cumulative thesis addresses various aspects of LIBs by developing and employing a wide range of different techniques. First, a set-up for performing operando X-ray diffraction measurements at various temperatures was developed and applied to examine the influence of temperature on the phase evolution during (de-)lithiation of graphite.[1] The results reveal that several phases co-exist during delithiation at 0 °C, supporting the shrinking annuli mechanism proposed by Heß and Novák.[4] Furthermore, it was found that the formation of graphite stage 2L is both temperature and C-rate dependent. In the second article of this thesis, several different techniques are used to parameterize two cylindrical 21700 cells with distinct energy and power characteristics for a physicochemical model in order to investigate how design variations affect cell performance.[2] The analysis of the disassembled cells revealed that the primary differences between the two cells are the anode active material, electrode lengths, porosities, and the thicknesses of electrode coatings and current collectors. Furthermore, the resistance of the high-power cell was optimized by increasing the electrical conductivity of the cathode coating and incorporating two tabs per electrode. Overall, the design variations represent a trade-off between cell resistance and energy density, where each cell is optimized for its specific application. The third article investigates the effect of temperature on degradation by further examining the high-energy cell, which was parameterized in the second article.[3] Non-invasive techniques, including electrochemical impedance spectroscopy, differential voltage analysis, and differential open circuit voltage, were employed to determine the degradation modes and mechanisms, which were subsequently confirmed through post-mortem analysis. Although the temperature was only varied between 10 °C and 35 °C, corresponding to typical EV usage in moderate climate zones, it had a significant influence on the longevity of the cell. Cells cycled at 10 °C and 25 °C experienced a sudden capacity drop and simultaneous rise in resistance, with a considerable deformation of the inner windings of the electrode sheets, and in case of 10 °C, significant lithium deposition on the anode surface. In contrast, cycling at 35 °C improved kinetics, which lead to a more homogeneous degradation and extended cycle life. Although non-invasive techniques effectively identified the primary degradation modes and mechanisms, the loss of cathode active material was considerably underestimated. Nonetheless, the employed non-invasive techniques are promising alternatives to elaborate post-mortem analysis.
Fields of Study & Subjects
Battery Modeling and Management
Advancements in Battery Materials
Advanced Battery Materials and Technologies
Publication details
- Publication date
- 1 January 2026
- Language
- EN
- Document type
- Thesis