Investigation of heavy metal ion removal by a modified magnetic nanosorbent [in Ukrainian]
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Surface modification of magnetic ferrite sorbents is a promising approach to enhancing the efficiency of heavy metal ion removal from aqueous systems. The aim of this study was to synthesize a magnetically active sorbent based on magnetite modified with sulfide sulfur–containing compounds and to investigate its sorption properties toward Cu²⁺ ions. Unmodified magnetite and thiourea-modified magnetite were synthesized by coprecipitation of Fe(II) and Fe(III) salts at pH 9.5–10. The sorption of Cu²⁺ ions was studied in model aqueous solutions over a wide range of concentrations and pH values. Sorption kinetics and equilibrium characteristics were evaluated using adsorption isotherms, with parameters determined according to the Langmuir model. The results demonstrate that thiourea modification significantly enhances the sorption capacity of magnetite toward copper ions. The minimum residual Cu²⁺ concentrations were 26.8 mg/L for unmodified magnetite and 5.9 mg/L for the modified sorbent at an initial Cu²⁺ concentration of 100 mg/L, corresponding to specific sorption capacities of 1.22 and 2.94 mmol-eq/g, respectively. An increase in solution pH was found to promote sorption efficiency due to the formation of inner-sphere surface complexes between Cu²⁺ ions and hydroxyl groups on iron oxide surfaces. For thiourea-modified magnetite, an additional binding mechanism involves chelation through nitrogen and sulfur atoms of thiourea. It was established that freshly synthesized modified magnetite does not exhibit magnetic properties; however, after aging for three days, structural ordering occurs, accompanied by the development of magnetic properties and a significant increase in maximum sorption capacity. The maximum specific sorption capacities reached 63 mg/g for unmodified magnetite and 80 mg/g for modified magnetite. The experimental adsorption isotherms are well described by the Langmuir model. Studies of the effect of Ca²⁺ ions showed that the sorption performance of the modified magnetite remains nearly unchanged even at an eightfold excess of calcium ions, whereas a pronounced decrease in Cu²⁺ removal efficiency was observed for the unmodified sorbent. The synthesized thiourea-modified magnetite–based magnetic sorbent exhibits enhanced specific capacity and selectivity in the presence of Ca²⁺ ions. A novel combined mechanism of Cu²⁺ sorption involving surface complexation and chelation was established, providing effective purification of aqueous solutions under conditions of alkaline earth metal ion interference.
Fields of Study & Subjects
Adsorption and biosorption for pollutant removal
Magnetic Properties and Synthesis of Ferrites
Environmental remediation with nanomaterials
Publication details
- Journal / source
- Proceedings of the NTUU “Igor Sikorsky KPI” Series Chemical engineering ecology and resource saving
- Issue
- 1
- Pages
- 76–83
- Publication date
- 30 March 2026
- Language
- EN