MODIFICATION OF THE FUEL INJECTOR NEEDLE AS A MEANS OF IMPROVING THE ECOLOGICAL AND ECONOMIC PERFORMANCE PARAMETERS OF OLDER-GENERATION COMPRESSION IGNITION ENGINES

Read full text Summarise with VIRAT
Authors: Oleh KLYUS, Marcin Szczepanek, S. Olszowski, Barbara Żurańska, Leszek Chybowski
Cited by: 0
References: 20

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This article investigates how modifications to the geometry of the injector flow channel influence the characteristics of fuel atomization, with particular emphasis on changes in the droplet size distribution. The modification consisted of mechanically forming two toroidal de Laval constrictions in the non-active section of the needle, creating the design variant referred to as 2L. The intention behind this approach was to enhance fuel turbulence within the flow region. The assessment was carried out using a three-hole H1LMK 148/1 atomizer equipped with orifices with a 0.34-mm diameter. Experimental tests were performed for the original, unmodified needle as well as for three needles incorporating the above-mentioned structural alterations. All configurations were evaluated during the operation of an older-generation FSC Starachowice S359M compression-ignition engine. The comparative analysis covered a range of parameters describing engine operating conditions and the composition of the resulting exhaust gases. The evaluated indicators included effective power output, mass-based and specific fuel consumption, nitrogen oxides, carbon dioxide and carbon monoxide emissions, exhaust smoke levels, oxygen concentration in the exhaust stream, and overall engine efficiency. The results demonstrate that incorporating the 2L constrictions improves the atomization process, leading to reduced fuel consumption and a measurable decline in carbon dioxide and toxic pollutant emissions. This confirms that the applied needle modification can be an effective means of improving the operational performance of the investigated engine.

Fields of Study & Subjects

Engine and Fuel Emissions Advanced Combustion Engine Technologies Technical Engine Diagnostics and Monitoring

Publication details

Journal / source
Transport Problems
Volume
21
Issue
1
Pages
97–110
Publication date
31 March 2026
Language
EN