HYDROGENATION PROCESSING OF WASTE LUBRICATING OILS INTO COMPONENTS OF AUTOMOTIVE GASOLINES

Read full text Summarise with VIRAT
Authors: Kyryl Volodymyrovych Shevchenko, Andriy Borysovych Grigorov
Cited by: 0
References: 19

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The article proposes to expand the raw material base for the production of automobile gasoline by using such a massive industrial waste as used lubricating oils, which, together with a valuable source of hydrocarbon raw materials, are a rather dangerous substance for the environment. For the processing of the specified raw materials, the possibility of using hydrogenation processes, in particular hydrocracking, which allows modifying the chemical com-position of hydrocarbons with simultaneous stabilization due to the presence of hydrogen, has been analyzed. Taking into account the peculiarities of the chemical composition of used lu-bricating oils, before hydrocracking, it is necessary to carry out special preparation of the raw materials, which consists in removing polluting impurities and hydrocarbon oxidation prod-ucts to the following level: water content (< 1 %); mechanical impurities content (< 0.5 %); Zn, Ca, Pb, Al content (< 0.01 %); hydrocarbon base content –C15–C35 (> 90 %); content of resins and asphaltenes (< 3 %). Also, for hydrocracking of used lubricating oils, it is neces-sary to use a catalyst resistant to metal poisoning and coking. As such catalysts, bifunctional catalysts represented by metals (Ni, Mo, W, Pt) and a base (zeolites, γ-Al₂O₃) should be used. Among commercial catalysts for hydrocracking of used oils, it is advisable to use Criterion DN-190 (Ni-Mo/Al₂O₃), TK-607 / TK-747 (Ni-W / Al₂O₃), ACT 452 (Ni-W/Zeolite) or HRK-103 (Pt/USY). As a result of hydrocracking on the specified catalysts, it is possible to obtain a product – a gasoline fraction (C5–C12), which, in terms of its chemical composition and re-lated properties (for example, octane number at the level of (MON 60–70), requires a com-pounding stage with high-octane components (alkylate, isomerizate or reformate) to increase the octane number (to ≥ 82.5 MON) in accordance with the requirements of DSTU 7687:2015 "AUTOMOTIVE EURO GASOLINES. Technical conditions".

Fields of Study & Subjects

Petroleum Processing and Analysis Catalysis and Hydrodesulfurization Studies Zeolite Catalysis and Synthesis

Publication details

Journal / source
Integrated Technologies and Energy Saving
Issue
1
Pages
19–31
Publication date
27 March 2026
Language
EN