A Feasibility Study on the Use of a Beam Derived Yarn Modeling Approach in a Multibody Environment

Read full text Summarise with VIRAT
Authors: Jan Schröder, Michael Beitelschmidt
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract The paper presents an approach to modeling yarn dynamics in textile production machines. The nonlinear beam model \textsc{Simbeam} is used to model the yarn in the multi-body simulation software \textsc{Simpack}. Achieving a successful modeling of the yarn dynamics necessitates the incorporation of the interaction between neighboring yarns. Two contact models are evaluated. Firstly, \textsc{Simpacks} native Polygonal Contact Model (PCM) is employed to model the contact between the beams. The present study identifies and emphasizes issues in the interaction between PCM and \textsc{Simbeam}. Specifically, the impact of the staggered grid discretization of the beam on surface tessellation, and the reliance of PCM on surface tessellation, have been identified as the limiting factor. A mitigation strategy was developed, and the results were presented. A discussion of the mitigation strategy and the achieved results have led to the determination that a novel solution must be created. Therefore, the Centerline Contact Method (CCM) is proposed. The fundamental premise of this concept is to leverage the elongated, slender configuration of the beam by employing mathematical approximations to estimate the neutral fiber of the beam. Contacts are searched for and resolved using a nonlinear contact stiffness and damping approach. The feasibility of the methodology can be demonstrated through multiple test scenarios. The novel approach has been evaluated, which has identified several limitations. Of particular concern is the need to enhance its computational performance. A comparison of PCM and CCM reveals that the latter requires fewer integration steps and results in larger mean steps sizes.

Fields of Study & Subjects

Dynamics and Control of Mechanical Systems Contact Mechanics and Variational Inequalities Textile materials and evaluations

Publication details

Journal / source
Research Square
Publication date
26 March 2026
Language
EN
Document type
Preprint