Improvement in the microstructure and mechanical properties of austempered nickel alloy steel using molten Zn and Sn cooling media
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
This research investigates the effects of molten zinc (Zn) and tin (Sn) as cooling media on the mechanical properties, microstructure, and fracture morphology of nickel alloy steel subjected to austempering treatment. The nickel alloy steel was prepared by casting: nickel, pig iron, steel scrap, FeCr, and FeMo master alloys with specific compositions. The composition of the nickel alloy steel was analyzed using an Optical Emission Spectrometer. The alloy was austempered by heating the samples for 1 hour at 1,000°C, then quenching by immersing them in molten Zn and Sn for 2 hours. This research conducted hardness testing using the Vickers Hardness Test. Microstructural and phase characterization were performed using X-ray diffraction (XRD) and optical microscopy. Fracture morphology was examined using scanning electron microscopy (SEM). The results demonstrate that austempering treatment significantly increases the hardness of the nickel alloy compared with the untreated sample. The specimen cooled in molten Sn exhibited the highest hardness, with an average value of approximately 405 HV, followed by those cooled in molten Zn (approximately 310 HV) and the untreated sample (approximately 240 HV). XRD analysis revealed the formation of a dominant bainitic phase in the sample cooled in molten Sn. Microstructural observations further indicated finer and more homogeneous bainite in the molten Sn-cooled sample compared with the molten Zn-cooled and untreated samples. SEM fractography showed predominantly ductile fracture characterized by small and dense dimples in the molten Sn-cooled sample, whereas the molten Zn-cooled sample exhibited a mixed ductile-brittle fracture mode. Overall, these results indicate that molten Sn is a more effective cooling medium than molten Zn in enhancing the hardness, toughness, and microstructural uniformity of nickel alloy steel
Fields of Study & Subjects
Microstructure and Mechanical Properties of Steels
Metal Alloys Wear and Properties
Metallurgical and Alloy Processes
Publication details
- Journal / source
- EUREKA Physics and Engineering
- Issue
- 2
- Pages
- 179–187
- Publication date
- 31 March 2026
- Language
- EN